The MDC pulse bag filter

Introduction

This product is widely used in construction, chemistry, metallurgy, non-metal mines, medicine, food, abrasive materials, plastics and some new materials, which is an ideal dust collection equipment from the aspects of industry and environmental protection.

Outstanding advantages

    1. The air flow combination is reasonable. It adopts the inlet flow and the downstream filtration to make the dust in the filtering state.
    2. At the same time, it has the effect of cohesive sedimentation, reducing the filter bag load and pulse frequency.
    3,.Filter bag mouth adopts elastic expansion ring seal. With good tightness, convenient disassembly. The frame is resistance welded.
    4. The outer surface is smooth without weld marks, which solves the problem of filter bag and frame wear. The filter bag has a long service life.
    5. According to the working environment, choose filter materials with different performance and specifications. The running resistance is stable, the energy consumption is low, and the dust removal efficiency is greater than 99.9%.

Introduction of working principle

    Dust-laden gas enters the middle and lower boxes from the air inlet of the dust collector, and the dust and gas are separated through the filtering of the filter bag. Dust is adsorbed on the surface of the filter bag, and clean air passes through the air outlet through the filter bag. Over time, more and more dust accumulates on the surface of the filter bag. According to the program set by the pulse jet instrument, the pulse blow valve is triggered in sequence. The compressed air in the air bag is instantaneously ejected from the holes of the blowpipe and injected into the corresponding filter bag through the venturi. The dust adsorbed on the surface of the filter bag immediately falls off, falls into the ash bucket, and is discharged through the dust discharging valve. drop directly into the warehouse.

Introduction of Technical Parameters

Technical Parameter Of The MCD Series Top Pulse Bag Duster
Technical Parameter Model and apecification
MDC-24 MDC-36 MDC-48 MDC-60 MDC-72 MDC-84 MDC-96 MDC-108 MDC-120

Filter area(㎡)

18 27 36 45 54 63 72 81 90
Number of filyer bag (piece) 24 36 48 60 72 84 96 108 120
Filyer bag size (mm) Φ127*2000
Working temprature(℃) <120(涤纶)
Equipment resistance(Pa) 1000-1500
Efficiency of dust collection (%) 99
Dust concentration at inlet(mg/㎡) <15
Velocity of filtering(m/min) 0.5-4
Airflow dealer(m³/h) 540-4300 810-64800 1080-8640 1350-10800 1620-12900 1890-15100 2160-17200 2430-19400 2700-21600
Injection pressure(Pa) 0.5-0.7
Pulse electromagnetic valve(piece) 4 6 8 10 12 14 16 18 20
Pulse width(s) 0.1-0.2
Pulse period(s) 60-120
Pulse interval (s) 1-5
Overall dimension(mm) 1100*1685*2527 1500*1685*2527 1900*1685*2527 2300*1685*2527 2700*1685*2527 3100*1685*2527 3600*1685*2527 400*1685*2527 4400*1685*2527
Global Contact
Tel:0086-536-3163838
Email:cnguote@163.com
Address:East of Dongjing Road, Qingzhou,Weifang City, Shandong Province, P.R.CHINA_262500
China Contact
TEL:0086-536-3685656
Email:cnguote@163.com
Address:East of Dongjing Road, Qingzhou,Weifang City, Shandong Province, P.R.CHINA_262500