GF Silicon micropowder classifier

Introduction of working principle

The whole classification device consists of an air classifier, a cyclone collector, a pulse precipitator, a high pressure draught fan and an electric control cabinet. The air classifier is a forced classifier with two times of intake and vertical installation. Under the action of the suction fan gravity, the material enters and rises to the zoning under the action of the suction fan. Because of the high-speed rotation of the graded impeller rotor, the particles are not only subjected to the centrifugal force produced by the rotating impeller rotation, but also the centripetal force produced by the fan. When the centrifugal force of the particle is larger than the centripetal force, the coarse particles above the diameter of the particle are obtained. The stall along the wall of the cylinder drops along the wall, and the outside two wind passes through the inlet of the cone evenly, and the coarse particles are produced by the wind screen, and the fine powder which is mixed or adhered to the coarse material is separated clean. The coarse material after separation is collected and discharged by the unloading device. The fine powder below the grading diameter is collected with the gas solid two phase flow into the cyclone collector and the pulse duster. The gas after the purification is discharged by the air draught fan.

Introduction of Technical Parameters

 Model  Capacity(kg/h)   Classification Efficiency    Particle Size(um)  Match Power(kw)
GF010 10-50 70-90% D97=3-50 7
GF020 50-350 15-19
GF050 100-800 25-30
GF100 300-1500 41-48
GF200 500-4000 63-73
GF400 2000-5000 97-20
GF500 3000-6000 110-30
GF600 4000-8000 140-169
GF800 6000-12000 170-210
GF1200 8000-20000 70-90% D97=3-50 230-280
Global Contact
Address:East of Dongjing Road, Qingzhou,Weifang City, Shandong Province, P.R.CHINA_262500
China Contact
Address:East of Dongjing Road, Qingzhou,Weifang City, Shandong Province, P.R.CHINA_262500