Cyclone jet mill

Introduction of working principle

After the compressed air is cooled, filtered, and dried, a supersonic gas stream is formed through the nozzle and injected into the rotating crushing chamber to fluidize the material.
In the rotary pulverizing chamber, the accelerated material meets at the intersection of the jets of several nozzles, causing severe collision and friction, thereby achieving ultrafine pulverization of the particles.
The pulverized material is transported to the impeller classification zone by the rising airflow. Under the action of the centrifugal force of the grading wheel and the suction force of the fan, the coarse and fine powder is separated, and the coarse powder is returned to the pulverization chamber according to its own gravity to continue pulverization, and the qualified fine powder is The airflow enters the cyclone collector, the fine dust is collected by the bag filter, and the purified gas is discharged by the induced draft fan.

Introduction of Technical Parameters

Model Feeing fineness(mm) Finished product fineness(μm) Finished product output (kg/h) Air energy consumption(m³/min) Air pressuer(MPa) Power(kw)
LHC-3 ≤3 2-150 20-150 3 ≥0.8 30
LHC-6 ≤3 2-150 60-300 6 ≥0.8 56
LHC-10 ≤3 2-150 120-700 10 ≥0.8 79.5
LHC-20 ≤3 2-150 250-1500 20 ≥0.8 165
LHC-40 ≤3 2-150 600-3000 40 ≥0.8 310
LHC-60 ≤3 2-150 1000-4500 60 ≥0.8 450
LHC-120 ≤3 2-150 2000-10000 120 ≥0.8 850
Global Contact
Tel:0086-536-3163838
Email:cnguote@163.com
Address:East of Dongjing Road, Qingzhou,Weifang City, Shandong Province, P.R.CHINA_262500
China Contact
TEL:0086-536-3685656
Email:cnguote@163.com
Address:East of Dongjing Road, Qingzhou,Weifang City, Shandong Province, P.R.CHINA_262500