Also known as magnetic drum, the drum magnetic separator, magnetic pulley is our usual is magnetic separator equipment as one of important building, also is the key in the process of magnetic separation machine manufacturing a link, is also prone to wear and tear of the important equipment in the magnetic separator, if there is serious wear magnetic separator roller will result in bearing damage, thus affecting the normal operation of the whole beneficiation production line, all on a regular basis for maintenance and maintenance of magnetic drum is very necessary, by families and sail small make up today we take a look at what are the maintenance methods of the magnetic separator drum.
We know that the magnetic separator drum with the material rotation, so the drum magnetic separator unloading effect is better, and the concentrate grade is higher.The working principle is that when the processed mineral material passes through the magnetic field of the magnetic separator, under the action of magnetic force and mechanical force, the mineral materials with different magnetism move along different paths, so as to separate the magnetic and non-magnetic materials in the mineral material.According to their own conditions every six months should be small maintenance.The specific maintenance content is: do not remove the cleaning cylinder inside the gear, (cycloid wheel or planetary wheel) and each support, operating parts, and replace the cooling lubrication fluid.Extensive maintenance should be carried out every two years.The content of maintenance includes unloading all parts and components, inspection, maintenance or replacement, and the oil used in the oil-immersed electric roller shall be used in strict accordance with the specified oil type in the operating instructions. Users shall not arbitrarily replace the oil type to prevent the motor from burning out.At the same time, we also need to carry out management from time to time, which can dig out some potential problems and solve them to a large extent, so as to minimize the economic losses caused by equipment failure.If the magnetic roller appears wear, we can use PVC coating to wrap the shell, PVC adhesive bond coating, can greatly improve the service life of the shell.Doing these things well will greatly delay the failure.
That's all we have to say today. If you have any questions or want to know the detailed price, you can consult our technical engineer online!Ke fan wish you a happy life!
