Swivel ring: In the process of using the device, the working state of the magnetic medium and the pressure bar pin should be checked frequently. Loose magnetic medium is easy to cause rotten nets and snap rings, and the pressure pin or bolt falling out may easily cause the snap ring.
Pulsating part: Because the various parts of the pulsating bucket are subjected to alternating force and the slurry pressure is large, it is necessary to repair in time when there is an ore leakage phenomenon in the pulsating part. Otherwise, the loophole will quickly expand, causing damage to the machine. The stroke end of the pulsation stroke box is a part that is easy to enter the water, so it is important to protect it. There should be a water baffle above the stroke box and its motor, and the stroke box should be replenished once every three months. It is also necessary to maintain the cleanliness of the oil.
Tailings valve: The tailings valve of this machine is one of the parts that is easy to be worn. It works as a throttle when working, and it also needs to withstand the pulsating impulse of ore pulp. The service life of general industrial valves is 1-3 months.
