Introduction of working principle
The ore pulp flow in the tangential direction to the central cylinder,then flows out of the bottom edge after being buffered.The slurry flows out radially to the surrounding overflow weir.In this process,the coarse particles whose sedimentation velocity is greater than the partial velocity of liquid flow will sink in the tank and through the bottom sediment discharge.Fine particles enter the overflow tank with the surface slurry.The feed particle size are less than 2mm.Classification size are 75μm or to be more fine.
Introduction of Technical Parameters
| Spceification (diameter :mm) | Φ1000 | Φ1500 | Φ2000 | Φ2500 | Φ3000 | Φ6000 | Φ8000 | Φ10000 |
| Subsidence area (㎡) | 0.75 | 2 | 3 | 4.9 | 7 | 15 | 32 | 59 |
| Cubage (㎡) | 0.27 | 0.83 | 2.27 | 4 | 7 | 15 | 28 | 60 |
| Row ore diameter (mm) | Φ25 | Φ40 | Φ50 | Φ60 | Φ70 | Φ80 | Φ100 | Φ150 |
| Puple density (%) | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 |
| Feed size (mm) | ＜2.0 | ＜2.0 | ＜2.0 | ＜2.0 | ＜2.0 | ＜2.0 | ＜2.0 | ＜2.0 |
| Capacity(t/㎡.h) | ||||||||
| The ore tube (mm) | Φ120 | Φ150 | Φ150 | Φ150 | Φ150 | Φ150 | Φ159 | Φ215 |
|
33-45 | 33-45 | 33-45 | 33-45 | 33-45 | 33-45 | 33-45 | 33-45 |
| Weight (kg) | 1500 | 1980 | 2483 | 3850 | 4600 | 6338 | 8482 | 103380 |
